The Wavin building and infrastucture business
Wavin is a leading global supplier of plastic piping systems and solutions and provides above and below ground solutions for hot and cold tap water, surface heating and cooling, soil and waste, rainwater management and below ground drainage.
Wavin is a full service provider offering customers end-to-end solutions including consultation, design, implementation and complete after-sales service.
Wavin's end-to-end solutions include consultation, design, implementation and after-sales service. Our customers are building and civil wholesalers, plumbing merchants, civil contractors, housing developers, large installers, utility companies and municipalities.

Highly respected within the construction industry, Wavin has a reputation for innovation and leadership and has an extensive product portfolio under the Wavin, OSMA, Hepworth, and Hep2O brands.
Wavin is a full service provider. By early involvement with clients in project planning and estimation, we assist them to identify solutions that achieve the optimum long term results.
Working closely with municipalities, installers, real estate developers and architects, Wavin has gained an extensive local knowledge of market requirements and regulations throughout most countries in Europe.
Wavin is part of Orbia, a community of companies bound together by a shared purpose: to advance life around the world. Wavin has 12,000+employees in 40+ countries worldwide.
Our locations
Wavin is headquartered in Zwolle, The Netherlands and has manufacturing plants in 15 countries. Our wide range of products are sold worldwide through our businesses and agents.
Innovation
The company is committed to innovation at all levels of our design, production and supply chain. Our goal is to achieve 20% of revenues from products less than five years old. In addition, profitability is increased through product rationalisation and other operational improvements. Product ranges such as the successful Hep2O Plumbing System and Wavin Cofia Underfloor heating pipe utilising Wavin's Hepworth push-fit technology are made from Polybutene-1 (PB-1).
The Hep2O pipe is manufactured from flexible PB-1 and the pipe comes off the coil straight and can be easily cabled through joists, making installation fast and easy. The packaging is designed to stay intact and feed the product as required. This allows the remaining pipe to be pristine for the next project.
All fittings are rigorously tested at Wavin's fully accredited testing Hepworth facility. Only when systems have been proved under appropriate temperature, pressure and loading conditions are they ready for the company's unique, industry leading 50 year guarantee. The Hep2O range has a guarantee twice as long as other plastic systems. This indicates the level of confidence Wavin has that Polybutene-1 is the best material selection for pressurised hot and cold water systems.

Quality
Wavin piping systems are the benchmark for excellence and product innovation. They are precision-manufactured using the most advanced injection moulding and extrusion machines, materials and processes. All products comply with or exceed relevant European and British standards to ensure reliability and long-lasting service. The British Standards Institution has issued certificates registering Wavin as a firm of assessed capability, with a quality management system which meets the requirements of BS EN ISO 9001.
All Wavin manufacturing sites operate Environmental Management Systems which comply with the requirements of and are certified to ISO 14001:2004.

The Wavin building and infrastucture business
Wavin is a leading global supplier of plastic piping systems and solutions and provides above and below ground solutions for hot and cold tap water, surface heating and cooling, soil and waste, rainwater management and below ground drainage.
Wavin is a full service provider offering customers end-to-end solutions including consultation, design, implementation and complete after-sales service.
Wavin's end-to-end solutions include consultation, design, implementation and after-sales service. Our customers are building and civil wholesalers, plumbing merchants, civil contractors, housing developers, large installers, utility companies and municipalities.

Highly respected within the construction industry, Wavin has a reputation for innovation and leadership and has an extensive product portfolio under the Wavin, OSMA, Hepworth, and Hep2O brands.
Wavin is a full service provider. By early involvement with clients in project planning and estimation, we assist them to identify solutions that achieve the optimum long term results.
Working closely with municipalities, installers, real estate developers and architects, Wavin has gained an extensive local knowledge of market requirements and regulations throughout most countries in Europe.
Wavin is part of Orbia, a community of companies bound together by a shared purpose: to advance life around the world. Wavin has 12,000+employees in 40+ countries worldwide.
Our locations
Wavin is headquartered in Zwolle, The Netherlands and has manufacturing plants in 15 countries. Our wide range of products are sold worldwide through our businesses and agents.
Innovation
The company is committed to innovation at all levels of our design, production and supply chain. Our goal is to achieve 20% of revenues from products less than five years old. In addition, profitability is increased through product rationalisation and other operational improvements. Product ranges such as the successful Hep2O Plumbing System and Wavin Cofia Underfloor heating pipe utilising Wavin's Hepworth push-fit technology are made from Polybutene-1 (PB-1).
The Hep2O pipe is manufactured from flexible PB-1 and the pipe comes off the coil straight and can be easily cabled through joists, making installation fast and easy. The packaging is designed to stay intact and feed the product as required. This allows the remaining pipe to be pristine for the next project.
All fittings are rigorously tested at Wavin's fully accredited testing Hepworth facility. Only when systems have been proved under appropriate temperature, pressure and loading conditions are they ready for the company's unique, industry leading 50 year guarantee. The Hep2O range has a guarantee twice as long as other plastic systems. This indicates the level of confidence Wavin has that Polybutene-1 is the best material selection for pressurised hot and cold water systems.

Quality
Wavin piping systems are the benchmark for excellence and product innovation. They are precision-manufactured using the most advanced injection moulding and extrusion machines, materials and processes. All products comply with or exceed relevant European and British standards to ensure reliability and long-lasting service. The British Standards Institution has issued certificates registering Wavin as a firm of assessed capability, with a quality management system which meets the requirements of BS EN ISO 9001.
All Wavin manufacturing sites operate Environmental Management Systems which comply with the requirements of and are certified to ISO 14001:2004.
